Spypoint BF-10HD Manuel D'utilisation page 5

8
PHOTO
To take pictures. The "PHOTO" mode must be
selected by pressing "OK"; the test light in front
Photo
of the camera will flash for 60 seconds to allow
the operator to walk away from the camera without being
photographed.
VIDEO
To take videos. The "VIDEO" mode must be
selected by pressing "OK"; the test light in front of
Video
the camera will flash for 60 seconds to allow the
operator to walk away from the camera without being recorded.
T
TEST
To set the camera or the desired distance. The
"TEST" mode must be selected, no picture or video
Test
will be recorded. Walk perpendicularly in front
of the camera. When the camera detects movement, the light
winks to indicate that normally, a photo or video would have
been recorded. If the system does not detect the movement,
increase the distance detection using the wheel "DISTANCE"
or realign the system differently. Once you understand how
the device responds to detections, you can better adjust the
direction or the height of the camera
In "TEST" mode, it is possible to take a picture by pressing
the "OK" button. The photo is saved and appears in the
"VIEW" mode.
9
Test light