Spypoint BF-10HD Manuel D'utilisation page 7

12
Select the temperature display in °F or °C.
Temperature:
(°C/°F)
Allow the user to take pictures or videos
Continuous:
(Yes/No)
even if the memory card is full. The camera
will continue to record photos or videos by
deleting the first recorded files.
Allow the user to select the battery power or
Power:
(Batteries/
the electricity power.
Electricity)
Choose «Electricity» if the camera is powered
by a main electric supply. (using a 12-volt
DC adapter AD-12V, sold separately). Main
electric supply is recommended for security
purposes. It provides an instant trigger time
when a movement is detected. The lithium
battery pack and the AA batteries can remain
safely inside the camera and it is ideal in case
of a blackout. A 12-volt DC adapter that can
provide a minimum of 800 mA is required
(See «Options» for accessories).
Note: When using the electricity power, the
"Multi-shot" mode and the "Delay" between
photos are disabled as the camera triggers
instantly every time it detects motion. Also,
the imprinting temperature on each picture is
disabled.
Allow the user to set the frequency at which time
Time
the camera takes a picture, without detection. For
Lapse:
(Off/30s/1m/
example, if the option "5 minutes" is selected
3m/5m/15m
in the "Time Lapse" mode, the camera takes a
/30m/1h)
picture every 5 minutes during that period of
operation (start time and stop time) even if there
is no detection.
This option allows the user to obtain pictures of
game outside the detection range of the camera.
Note: The "Time Lapse" mode only applies
in "PHOTO" mode, not in "VIDEO" mode.
When "Time Lapse" mode is selected, the
"Delay" mode and the "Multi-shot" mode are
disabled. The photo resolution remains the
same except for the low resolution which are
reduced to 800 x 600.
VIEW
View recorded photos or videos on TFT 2.4"
viewing camera screen or on a TV set at home.
View
•Viewing with the 2.4" screen: When «View» mode is
selected, the latest photo or video recorded appears on the
screen automatically. Press "" or "" to view next or previous
images. Press "" and "" to zoom in and out. When the zoom
is activated, press "OK" to move the image by using "", "",
"" or "". Press "OK" again then "" to return to normal
view.
Press "OK" to view the different options available in "VIEW"
mode.
13