Spypoint BF-10HD Manuel D'utilisation page 6

10
How to properly install your camera
using the supplied installation strap:
(Recommended installation height: about 3 feet).
SETTINGS
Allows the operator's own settings. To set the
system in English, hold the button "" until
Settings
"Language" is highlighted. Press "OK", select
"English" with the button "" or "" and confirm your choice
with "OK". The system will than change all the menus to
English.
Allow the user to set the period of operation
Time Start
of the camera. The start and stop time are
/Time Stop:
the hours during the camera is in action and
records pictures or videos. Example: If the
user selects a start time "7:00 am" and a stop
time "11:00 am", the camera will only detect
for that period of time and will stay inactive
for the remaining hours. Press "OK" and use
"" or "" to adjust the hour. Press again
"OK" to set the minutes. When the time is
properly set, press "OK" once more to go
back.
For an activation of 24 hours, the same start
and stop time must be entered (example:
00:00 as start time and 00:00 as stop time.
These hours are the basic settings of your
camera).
11