Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Maintenance of the hood
Please allow the lights to cool down sufficiently before
cleaning the hood.
Use a soft, wet cloth and a mild detergent to clean the
hood.
Never use aggressive, abrasive detergents or sponges.
Bleach will damage stainless steel.
The stainless steel surfaces can be treated with Novy
Inoxcleaner (906.060) after cleaning.
5. REPLACING THE LAMPS
First take the plug from the wall socket or switch off
the power group. Let the lamps cool down sufficiently
before replacing them.
A suction cup for removing the lamps has been
delivered with the hood. Place the suction cup onto the
halogen spot and draw it towards you. The lamp will
now come out. You can also install the new lamp using
the suction cup.
6. TECHNICAL PROBLEM
In case of technical problems please contact Novy
Service Department:
• For Belgium: Tel.: 056/36.51.02
• For France: Tel.: 03.20.94.06.62
• For Germany: Tel.: 0511.54.20.771
For all other countries: your local installor or Novy Bel-
gium: +32 (0)56/36.51.02
Please supply us with the model number of your hood.
The model number can be found on the engra-
ved plaque behind the filter.
You can make a note of the number here:
.................................
Dimensions: p. 14-15
Electrical scheme: p. 16
EN 13
Publicité
Table des Matières
