Replacing The Lamps - Novy 830/6 Mode D'emploi Et D'installation

Replacing the lamps

Please allow the lights to cool down sufficiently
before touching them. Cover and protect delicate
surfaces underneath the hood when changing
lamps.
• open the hood by pulling down simultaneously
on the right and left side of the plate (a)
• remove the 2 screws (c) and carefully lower
the holder (c);
• remove the lamp by pushing down from be-
hind (d);
• push a new lamp in the opening (e);
• reattach the holder with the 2 screws;
• close the hood by pushing the plate up
The hoods have 2 lamps of the following type:
20W – 12V – 60° - Ø51mm – GU 5,3
Total energy consumption with lightning:
830, 831, 840, 841: 380 W
835, 845 (with 445999): 320 W
Dimensions: p. 23
Electrical scheme: p. 24
EN 17