Replacing The Lighting; Service; Quickguide; Settings - Novy 552.060 Série Mode D'emploi

3.3 Replacing the lighting

First, remove the power supply from the hood
and allow the lighting to cool down sufficiently.
Open the glass plate and remove the grease filters from the
hood. You can reach the 2 LED spotlights at the bottom
of the hood with your hand.
3.3.1 Replacing the ligthing
Push the glass along with the frame (rail) up and unscrew
the screws completely. Keep hold of the glass as you
remove the frame (rail). Slide the glass to the rear in order
to remove it.
The lightbulbs are of type 15 Watts for the 60 cm hoods,
and a TL lightbulb of 18 Watts for the 90 and 100 cm hoods
3.3.2 Reassemble parts:
After this, you can reassemble everything in the reverse
order. Check if the grease filter(s) are properly fitted and
locked tightly. Then the electrical power can be put back
on the cooker hood.

4 QUICKGUIDE

4.1 Settings

EXPOSED
Inschakelen motor
Increase engine speed
Decrease engine speed
Lighting on
552060-090-100 G22M
1 2
ACTION INDICATION
2
3 4
or
2 3
or
1

3.4 Service

If there is a fault you can contact your (kitchen) supplier
and/or Novy Customer Service.
Belgium Tel.: +32 (0)56 36 51 02
France Tel.: +33 (0)3 20 94 06 62
Germany Tel.: +49 (0)511 54 20 771
The Netherlands Tel.: +31 (0)88 011 91 10
United Kingdom Tel.: +44 (0) 207 866 2493
For all other countries: your local installer or
Novy in Belgium: +32 (0)56 36 51 02
To be able to deal with the fault promptly and efficiently it
is necessary that the Repaired Service knows which type
of appliance you have.

You can find the type number on a sticker in
the inside of the extractor hood. This becomes
visible as soon as you take the filter out of the
extractor hood.
You can note the type number here:
3 4
NOTE PAG.
p 23
p 23
p 23
p 23
25/25