Technical Specifications - Hudora 77032 Instructions De Montage Et Mode D'emploi

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral com-
ponent of the product. Therefore, please store them and the packaging carefully
in case questions arise in the future. Please always include these instructions
when handing on the product to a third party. This product must be assembled
by an adult. This product is not designed for industrial use. The use of the pro-
duct requires certain capabilities and skills. Always adjust according to the age
of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Sisal Dartboard Winner
Item number: 77032
Weight: ca. 4,5 kg
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Dartboard
1 x Bag with 1 metal hook, 3 screws, 3 fixing brackets, 3 nails
6 x Darts, complete
1 x These instructions
Other items are meant to facilitate safe transportation and are not required for
the installation and use of the product.
SAFETY INSTRUCTIONS
This dart game is not suitable for children! Do not leave it lying around unsuper-
vised and store it away from child access. All spectators and players must stand
behind the dart shooter. Young people should be supervised by an adult. Don't
aim at any people or animals. Darts are not a child's toy. Make sure that you
keep the area around the dartboard free! Do not allow through-traffic. Children,
other persons or animals should not remain in front of, next to or behind the
dartboard. Please note that the steel tips can cause injury or damage. Please
choose the location of your dart board very carefully. We do not take liability for
damages from incorrect handling.
INSTRUCTIONS ON ASSEMBLY
Dartboard Assembly: Attach the included metal hook at a height of 173 cm
above ground – measured from the centre of the dart board (bullseye) – against
the wall, using 2 of the included screws. Adjust the third screw into the centre
on the back of the dartboard. You can fix the fixing brackets with the enclosed
nails, at three points on the back, in order to prevent a swinging of the disc. The
launch position marking must be 237 cm from the dartboard. To ensure that you
have full range of movement while launching your darts, you will have to have
an additional clearance of 100 cm behind the launch position marking. (Fig. 1)
USAGE INSTRUCTIONS
RULES
Who begins?
Each player throws a dart at the dartboard. Whoever throws nearest the bullseye
can begin. After this the players take turn until the end of the game.
Throw
A throw consists of three darts. All darts are thrown one after another at the
dartboard by hand.
How to score (Fig. 2)
The dartboard is divided into 20 segments (1-20) and has an additional 2 bull
fields in the centre. Two rings run through the segments. The outer ring (double)
gives you double points; the inner ring (triple) gives you treble points. The outer
bull area counts for 25 points and the area in the middle (bullseye) counts for
50 points. Darts which drop off from the board or hit outside of the outer ring
do not count.
All images are examples of the design.
301/ 501 GAME (YOU REQUIRE PEN AND PAPER.)
Each player begins with either 301 (2 players) or 501 points (more players). The
points thrown should be subtracted from the starting points. Whoever reaches 0
points first, wins the leg. It can be agreed that 0 points have to be reached with
a double, triple, bull or bullseye. (Example: 14 points are left. If you agreed upon
double, the last dart must hit segment 7 in the outer ring.) If more points than
necessary are thrown to reach 0 points, none of the three darts from this round
count and the score of the previous round remains unchanged. A game consists
of 3 legs. The ultimate winner is the player who wins 2 legs first.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and
after each use. Do not make any structural changes. For your own safety, please
use original spare parts only. These can be sourced from HUDORA. If parts
become damaged or if sharp edges or corners should develop, the product may
not be used any more. If in any doubt, please contact our service team (http://
www.hudora.de/). Store the product in a safe place where it is protected from
the elements, cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. Therefore, you can find numerous
information on the product, replacement parts, solutions to problems and lost
assembly manuals at http://www.hudora.de/service.
4/8