Bodet Profil 750 Manuel D'installation Et De Mise En Service page 39

5. WHAT TO DO IF... CHECK.
What to do if... ?
No synchronisation after installation.
AFNOR/IRIG-B slave clock has stopped
MIN 24V slave clock has stopped
Check
Check that the signal type emitted by the
master clock (Impulse Minute 24V, AFNOR/
IRIG-B) is the same signal type as the clock's
movement.
No time message for over an hour. Check
the master clock, the network and the cable
connections inside the clock.
No impulse, check the master clock and the
network. Check the cable connections in the
terminal block inside the clock.
EN
39