Renkforce 1359882 Notice D'emploi page 69

1 = Grey
2 = Pink
3 = Purple
4 = Orange
5 = Red
6 = Black
The enclosed connection cable with its 12-pin plug has 12 individual colour coded lines. They
are assigned as follows:
Connection for sabotage contact, cable = grey (1) + pink (2)
This output can be connected, e.g., to an alarm system to trigger a siren when there is any
manipulation attempt at the code lock.
The output is potential-free and switched as an NC contact. Opening the code lock housing will
interrupt the contact.
Contact resilience: 24 V/DC, 50 mA
Output #2, cable = purple (3) + orange (4)
Output #2 is potential-free and can be switched between NC and NO contact with a jumper
(see chapter 7).
Contact resilience: 24 V/DC, 1 A
Connection for operating voltage, cable = red (5) + black (6)
These two connections are connected to operating voltage (red cable = stabilised direct voltage
+12 V/DC, black cable = GND/minus). The power consumption of the code lock is no more than
approx. 160 mA. Always ensure correct polarity when making connections!
7 = Light blue
8 = Brown
9 = White
10 = Yellow
NC
11 = Green
COM
12 = Blue
NO
69