Detailed Settings; Setting The Language; Setting The Tag Short - WIKA DMSU21SA Mode D'emploi

9. Diagnostic functions / 10. Detailed settings
Resetting
1. Open the operating menu with [↵].
Select "Diagnostic" and confirm with [↵].
2. Select "Operat. time" and confirm with [↵].
3. Select "reset" and confirm with [↵].
4. Confirm operating time with [↵].
» Operating time is reset.

10. Detailed settings

10.1 Setting the language

Available languages: German, English, French, Spanish
1. Open the operating menu with [↵].
Select "Detail setup" and confirm with [↵].
2. Select "Language" and confirm with [↵].
3. Select language and confirm with [↵].
» Language is set.
10.2 Marking the measuring point (TAG)

10.2.1 Setting the TAG short

TAG short enables 8 figures with a limited character set (numbers and capital letters).
TAG short can be displayed in the additional display.
1. Open the operating menu with [↵].
Select "Detail setup" and confirm with [↵].
2. Select "Marking" and confirm with [↵].
WIKA operating instructions, model DMSU21A
EN
45