Scope Of Delivery - WIKA DMSU21SA Mode D'emploi

2. Design and function
Display and operating unit
The display and operating unit has a main and an additional display.
Rotatable case head
330°
Displaceable display and operating unit
The main display and the additional display are able to be set in many ways. In the factory
setting, the main display shows the pressure value of the output signal and the additional
display shows the temperature at the pressure sensor.
The process transmitter can be configured via the display and operating unit.
Adaptable to mounting position
The process transmitter is fitted with a case head which can be turned through 330°. The
display and operating unit can be attached in 90° steps. Thus the measured value can be
read irrespective of the mounting position.

2.3 Scope of delivery

Diaphragm monitoring system
■
Operating instructions
■
Cross-check scope of delivery with delivery note.
WIKA operating instructions, model DMSU21A
EN
9