Parkside PATC 2 A1 Instructions D'utilisation Et Consignes De Sécurité page 6

List of pictograms used
Volt (direct current)
Volt (alternating voltage)
Safety class II
Safety class III
(SMPS) Switch mode power supply unit
Short-circuit-proof safety isolating transformer
Polarity of output terminal
USB-connection
Cordless Work Light PATC 2 A1
Introduction
We congratulate you on the purchase of your new product. You
have chosen a high quality product. The instructions for use are part
of the product. They contain important information concerning safety,
use and disposal. Before using the product, please familiarise your-
self with all of the safety information and instructions for use. Only
use the product as described and for the specified applications. If
you pass the product on to anyone else, please ensure that you also
pass on all the documentation with it.
Intended use
This product is only suitable for private use in dry indoor
locations e.g. in workshops or garages. The product and
rechargeable batteries withstand extreme physical condi-
tions of vibration (1.0 m
intended for commercial use or for use in other applications.
Description of parts
Hand spotlight
1
ON / OFF switch
2
Telescopic work light
3
Magnetic base
4
Magnet
5
Orientation light
6
Grip
7
Technical data
Cordless work light:
Illuminants:
6 GB/IE/NI
/ s 200–2000 Hz). This product is not
2 3
Not suitable for household room illumination.
1 "COB" LED for the telescopic work light;
6 LEDs for the orientation light;
1 LED for the hand spotlight
(not interchangeable)
Micro-USB input socket
8
Charging indicator
9
Folding hook
10
Mains adapter
11
Car adapter (for cigarette
12
lighter socket)
USB cable
13