Festo MAS Série Notice D'utilisation page 18

MAS-...
S
Take into account the prevailing ambient
conditions.
S
Please comply with national and local
safety laws and regulations.
S
Remove the packaging except for the ad-
hesive lables on the compressed air con-
nections (otherwise dirt will enter).
The packaging material is intended for
recycling (exception: oiled paper must be
disposed of ).
S
Maintain the medium selected for the
complete service life of the product.
Example: always use non-lubricated com-
pressed air if this was used at the start.
S
Slowly pressurize the complete system.
To do this use the safety start-up valve
type HEL-... . In this way you will prevent
sudden uncontrolled movements.
S
Always use the product in its original
state without undertaking any modifica-
tions.
5 Fitting
Mechanical components
Note
Mechanical stress on the textile-fibre
tubing can damage the MAS-...
S Ensure that the MAS-... is fitted free of
torsional forces.
18
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Festo MAS-... 0010NH - English