Midi; Program Change (Pc); Control Change (Cc) - Two notes Audio Engineering Torpedo C.A.B. Manuel De L'utilisateur

MIDI

Your Torpedo C.A.B. can receive MIDI PROGRAM CHANGE (PC) and CONTROL CHANGE (CC)
commands sent by any kind of MIDI controller connected to the MIDI IN of the machine.

1 PROGRAM CHANGE (PC)

Each preset on the Torpedo C.A.B. has a single program number. The preset 001 of the machine
is triggered by a MIDI PC 1, you can address the 128 presets, with MIDI PC 1 to MIDI PC 128. This way,
it is possible to randomly access the preset by sending the appropriate MIDI PC number.

2 CONTROL CHANGE (CC)

The following table contains the assignment of the parameters of the machine and the MIDI CC
numbers and values.
34
It is important to set up the Torpedo C.A.B. so it will be listening to the
MIDI control commands.
Two notes Audio Engineering Torpedo C.A.B.