Edit Menu - Two notes Audio Engineering Torpedo C.A.B. Manuel De L'utilisateur

CHAPTER 4. CONFIGURING AND USING THE TORPEDO C.A.B.
Button
Hold footswitch A & EDIT
PRESET/PARAMETER
OUT LEVEL/VALUE
HOLD TO SAVE/EDIT (hold)
HOLD TO SAVE/EDIT (toggle)

6 EDIT menu

In the EDIT menu, you will have access to all the parameters of a preset. You can choose between
two preset modes: Arcade or Simulation. We borrowed the concept of Arcade VS Simulation from
the world of video games. Let us take the example of a racing game.
The Arcade mode is usually the easy way to, for example, drive a race car. You can hit obstacles,
other cars, you can still win the race. We recommend that for your first experience with the Torpedo
C.A.B. you start with the Arcade preset mode to get more familiar with the concept of virtual miking.
The simulation mode is for more advanced users. It requires more experience and knowledge
about how the car actually works, depending on many tiny but still important parameters (weather,
type of tires, track design...). In that preset mode you will gain access to the full list of parameter, to
fine tune your sound and make it perfect to your ears.
The various functions of the buttons in EDIT menu are described in the following table:
Navigate through the modules with the PARAMETER encoder. In Simulation mode, a module is ac-
tivated when it's On, you can change the module state with the VALUE encoder. Once the module
is On, you gain access to the module parameters.
On the second line you will find the parameter name and its value. Change the value using the
VALUE encoder.
22
Set the Output volume between -95dB and +12dB
Button
Hold footswitch A & EDIT
PRESET/PARAMETER
OUT LEVEL/VALUE
HOLD TO SAVE/EDIT (hold)
HOLD TO SAVE/EDIT (toggle)
You will find several modules in the EDIT menu (Power Amp,
Miking, EQ and Room in Simulation mode for example), fol-
lowed by the output volume of the preset (this volume setting
is saved with the preset, so you can adjust the levels in order
for the presets to be at comparable volumes).
On a parameter's page (change the page with the PARA-
METER encoder), the first line will display the module name,
the parameter index and the number of parameters of the
module.
Two notes Audio Engineering
Function
Switch to SETUP menu
Navigate the preset
Save a preset between 001 and 128
Switch to EDIT menu
Function
Switch to SETUP menu
Navigate the parameters
Modify the selected parameter
Save a preset between 001 and 128
Switch to PERFORM menu
Torpedo C.A.B.