Publicité
Remove the upper housing from the lower housing and set it aside for a
moment. Take the lower housing over to your sink/bathtub/water source and
fill it with regular tap water up to the water line. Remember the bottle(s) of Water
Treatment Additive? Go grab those and pour them into the water
in the lower housing. Once it's filled, carry it back over to the upper housing.
Place the upper housing back onto the lower housing.
6. TURN IT ON
Plug the humidifier in, switch on device by briefly touching the power button in the
display, set the power setting to the highest speed, and enjoy the fresh air! At the
highest setting, the humidifier will need to run continuously for about 7–10 days to
properly condition the room it is in. After that, you will notice the full impact of the
humidifier upon the air in your home!
Only once the device is connected to the mains will the power button glow to
i
switch the device on and off.
US
7
Publicité
