Publicité
EASY SETUP GUIDE
WELCOME TO THE VENTA COMMUNITY!
Setting up your humidifier is much simpler than you would expect. Just follow
these 7 steps and your humidifier will be up-and-running in less than 10 minutes!
1. UNPACKING
First things first, remove bottle(s) of Water Treatment Addi-
tive from the corner of your packaging (Only the AH550/AH555
models come with two sample sized bottles). Keep these handy
as you'll need them in a bit. Unpack your humidifier setting the
Styrofoam aside. You may want to return the Styrofoam to the box
and keep the box for any future humidifier storage needs.
2. EXAMINE YOUR HUMIDIFIER (PART 1)
Check both the upper housing and the motor for any cracks or damages. If both are
fine, place the motor back inside its housing, making sure to plug it back in as you do
so. Close the upper housing, starting with the vented panels, and clip the tabs. Set the
upper housing upside down.
4
US
Publicité
