Publicité
Display
6
WIFI
7
AUTO
12
US
Function
Switch the WiFi connection on and off by tapping.
Activate the HOTSPOT mode by touching and holding
for 3-5 seconds. You will find a detailed description in the
section "WiFi / hotspot".
Switch
Automatic mode
button.
ON:
In the display, AUTO flashes continuously and the ap-
pliance automatically regulates the power level according to
the humidity in the room.
When switching on AUTO, the desired humidity (50 %
i
pre-set) flashes twice and then the measured humidity
in the room is shown in the HUMIDITY display
When the preset humidity is exceeded by more than
5 %, the fan shuts off after approx. 60 sec. and no
power level appears in the speed reading
tion occurs.
OFF:
AUTO in the display is continuously illuminated and the
appliance operates with the power level set at 1 – 3.
Set desired humidity 30 – 70 %:
Hold AUTO button for 3-5 seconds. The HUMIDITY
play flashes continuously. Set the desired humidity (in 5 %
increments) using the - or + buttons
for 3-5 seconds again until the flashing in display HUMIDITY
1
stops and the humidity measured in the room is shown
again. Please make sure that automatic mode is switched
on: AUTO flashes continuously in the display!
on or off by tapping the AUTO
2.
3
. Hold AUTO button
1
.
No humidifica-
1
dis-
Publicité
