Publicité
Connect the extension worktable to the
worktable with 2 bolts M8X12, 2 washers Ø8 et
2 locking nuts M8.
Connect the table cover plate with the
worktable with 3 bolts M8X15, 3 locking nuts
M8 then fix it to the saw blade inner guard with
2 bolts M5X8 et 2 locking nuts M5.
Assembly step 8
Table cover
Assemble the handle.
Unscrew 2 screws M4X6 of the table cover and
connect it to the table cover plate and tighten
back the 2 screws M4X6.
Page 53 of 63
Publicité
