Publicité
25.1.
Residual mechanical hazards
Hazard
Cut, severed
Hanging, winding
25.2. Residual electrical hazards
Hazard
Direct electrical
contact
Indirect electrical
contact
25.3. Residual hazards resulting from noise
Hazard
Hearing lesion
25.4. Danger resulting from materials and other materials
Hazard
Contact,
Inhalation
25.5. Failure to ergonomic principles
Hazard
Using neglected
/
damaged
personal
protective
equipment
Insufficient room
lighting
25.6. Other dangers
Hazard
Ejected objects or
fluids
26. Electrical connection - Safety
- The supply line must be in accordance with IEC60245 (H07 RN-F) fitted with conductors having a
cross section of at least 1.5 mm² and a maximum length of 10m.
- Never use power lines or extension cords over 10m long. Longer supply lines cause a voltage drop.
The motor does not reach its maximum performance resulting in operation of the machine being
restricted.
- When installing the supply line, ensure that it is neither trapped nor compressed, or bent and that the
connector is not subject to moisture or falls in any liquid.
- Do not use the cable for purposes for which it is not intended. Protect the cable against heat, oil and
sharp edges. Do not pull the cable to remove the plug from the socket.
Description
Risk of injury by rotating parts
Contact with rotating saw
blade can cause serious injury.
Ample clothes, hair or
jewellery can get caught on
moving parts.
Description
A defective cable or plug can
cause electric shock.
An open live part or a
defective construction part can
cause
injuries.
Description
Extended work with the
machine can damage hearing
Description
The dust formed during the
working process can damage
the
lungs.
Harmful wood dust emission
to the health when operating
the apparatus without dust
extraction device
Description
Handling the machine without
proper protective equipment
can lead to serious external or
internal injuries.
Insufficient room lighting may
cause hazardous situations
Description
The saw blade or mechanical
particles can hurt your eyes
when
cutting.
Safety measures
Be careful when cutting
small parts, always use
the pusher supplied with
the appliance (if any).
Never touch the rotating
saw blade.
Always wear tight fit
clothing and protect your
hair with a net.
Safety measures
If the cable or plug is damaged
a specialist.
Use the device only with a switch against the default
current
(FI).
Before
cleaning, remove the
Safety measures
Always wear an ear protective
Safety measures
When using the
machine, always wear
Connect and use the dust extraction
Safety measures
Always wear an adequate personal
with
caution.
Ensure
to have
sufficient lighting when handling the
machine.
Safety measures
Always wear eye protection.
Residual risk
A worn or damaged
accessory must be
immediately replaced.
-
have them replaced
plug from the
socket.
equipment.
a mask.
device.
protection, work
Page 48 of 63
by
Publicité
