Publicité
Assembly step 3
Assembly step 4
Lower cover
Assembly step 5
Guide plate
M6X12
M6X25
Saw blade inner guard and guide plate
Connection of the inner part of the saw blade
inner guard to working table.
Fixing the guide plate.
Lower cover
Bolt M6X12 1pc
Bolt M6X25 1pc
Connection of the lower cover to working table
by using 1 screw M6X12 to fix them together
and 1 screw M6X25 to fix them to the
supporting leg.
Saw blade
Inner flange (D) 1pc
Outer flange (E) 1pc
Saw blade 1pc
Locking nut M20 1pc
Screw M6X12 2pcs
Screw M5X6
Place in succession the inner flange, the saw
blade and the outer flange on the motor shaft
and fix them with 1 locking nut M20 (hold the
outer flange with a spanner and fix the locking
nut with another spanner).
Page 51 of 63
Publicité
