Connection - Waldmann SPOT LED 003 MCEYL 3 S Mode D'emploi

GB Instructions For Use Machine Light MCEYL 3 S „SPOT LED 003"

Connection

Caution
Damage caused by wrong mains
voltage!
A wrong mains voltage can result in
damaging or destroying the light.
Lights of internation-
¾
al protection class III
must be operated only
with safety extra low voltage
(SELV)!
Connection only by a skilled
¾
electrician!
Before putting the light into
¾
operation, the user has to check
whether the supply voltage is
identical with the rated voltage
specified on the rating plate!
All wiring termination shall be
¾
in accordance with the National
Electric Code!
Note
The light is protected against po-
larity reversal. The function is also
guaranteed when the two lines are
interchanged.
Light with connecting cable
The light is supplied with free
strand ends for connection to
safety extra low voltage (SELV).
For connection to the supply volt-
age use the terminal connector
provided with the light.
For lights with accompanying
terminal strip, the outlet must cor-
respond to the protection type of
the light and be adequately dimen-
sioned for the terminal strip.
Light with connector
See page 24.
Note for USA
This device must be connected to
a class 2 power supply!
23