Publicité
3.
Apply prepared soapy water at the in-
jector connection with a small brush, if
there is leakage of gas at the injector
connection the soapy water will begin
to froth. In this case, tighten the in-
jector with a reasonable force and re-
peat step 3 process once again.
4.
If the froth still persist you must turn
off the gas apply to the product imme-
diately and call an Authorised service
5 First Use
Before you start using your product, it is re-
commended to do the following stated in
the following sections respectively.
5.1 Initial Cleaning
1. Remove all packaging materials.
2. Remove all accessories from the oven
provided with the product.
3. Operate the product for 30 minutes and
then, turn it off. This way, residues and
layers that may have remained in the
oven during production are burned and
cleaned.
4. Select the highest operating level of the
gas oven. You can learn how to operate
the oven in the following section.
6 How to use the hob
6.1 General information on hob usage
General warnings
• Place pots and pans in a manner so that
the handles are not over the burners to
prevent them from overheating.
agent or technician with licence. Do not
use the product until the authorized
service has intervened in the product.
5. Wait for the oven to cool.
6. Wipe the surfaces of the product with a
wet cloth or sponge and dry with a cloth.
Before using the accessories:
Clean the accessories you remove from the
oven with detergent water and a soft clean-
ing sponge.
NOTICE: Some detergents or cleaning
agents may cause damage to the surface.
Do not use abrasive detergents, cleaning
powders, cleaning creams or sharp objects
during cleaning.
NOTICE: During the first use, smoke and
odour may come up for several hours. This
is normal and you just need good ventila-
tion to remove it. Avoid directly inhaling the
smoke and odours that form.
• Do not use unbalanced and easily tilting
pots/pans on the hob.
EN / 33
EN
FR
Publicité
