Publicité
Put back the spindle holder cover and tight the 2 screws.
Replacer le carter de protection et resserrer les 2 vis.
This operation is finished, switch on the machine in order to check the correct
detection of the Z limit switch.
Opération terminée, mettre sous tension la machine afin de vérifier la bonne
détection du Switch.
NOTICE TECHNIQUE GAMME M40
M40 RANGE TECHNICAL MANUAL
Page - 51
Date : June 2009 From
Aftersales Technical Support
Ref. M40 GB/FF ‐ Vers. 1.0
Publicité
