Télécharger Imprimer la page

GRAVOGRAPH M40 Serie Manuel Technique page 28

Publicité

Reassembling operation   ‐ Opération de remontage 
Put the PUI board on its holder and then fix it with the four screws.
Mettre la carte PUI en place sur la tôle et la fixer à l'aide des 4 vis
Connect the 24V connector power supply.
Connecter le connecteur d'alimentation 24 V.
Put back the CPU board ; see chapter M40-006
o Remettre en place la carte UC. voir chapitre M40-006.
Put back the black cover and fix it by 4 screws.
Remettre en place le capot de protection
noir, puis le fixer à l'aide des 4 vis.
This operation is finished,
Opération terminée,
o
NOTICE TECHNIQUE GAMME M40 
M40 RANGE TECHNICAL MANUAL 
process to an engraving test
effectuer une gravure test
Page - 29
Date : June 2009   From 
Aftersales Technical Support 
Ref. M40 GB/FF     ‐     Vers. 1.0

Publicité

loading

Produits Connexes pour GRAVOGRAPH M40 Serie