Publicité
9. Service Settings
9.3.1 E0: Defrost mode Selection
Step1.
Select "E0: Defrost mode Selection" on "3d: Cycle
Operation" screen and press "OK".
Step2.
Press " " or " " to select the desired item and
press "OK".
Press "
9.3.2 E1: Thermistor Calibration for Cooling
Step1.
Select "E1: Thermistor Calibration for Cooling" on
"3d: Cycle Operation" screen and press "OK".
Step2.
Press " " or " " to change the thermistor
calibration for cooling, then press " " to select
"
OK
68
" to return to Step1.
" and press "OK". Then it returns to Step1.
3d: Cycle Operation
E0: Defrost mode Selection
E1: Thermistor Calibration for Cooling
E2: Thermistor Calibration for Heating
E3: Fan Speed at Cooling Thermo-OFF
E4: Fan Speed at Heating Thermo-OFF
Select
OK
E0: Defrost mode Selection
01: Standard
02: Setting for cold area
OK
Select
3d: Cycle Operation
E0: Defrost mode Selection
E1: Thermistor Calibration for Cooling
E2: Thermistor Calibration for Heating
E3: Fan Speed at Cooling Thermo-OFF
E4: Fan Speed at Heating Thermo-OFF
OK
Select
E1: Thermistor Calibration for Cooling
-2 °C
A16382H32B
(Mon) 16:30
Back
Back
(Mon) 16:30
Back
OK
Back
Publicité
