Publicité
8. Service & Installation Screen
8.3 Temperature Range Restriction
The temperature range can be set by the wired remote controller.
1.
Set Temperature Range
Step1.
Select "Temperature Range Restriction" on the
Service & Installation screen and press "OK".
Step2.
Select "Upper/Lower Limit for Cooling
Operation"/"Upper/Lower Limit for Heating
Operation"/ "Upper/Lower Limit for Auto mode"
and press "OK".
Step3.
Press " ", " " to select the setting limit, then
press " ", " " to change the temperature value.
After value setting, select "
Step4.
Press "
NOTE:
Please make sure that the upper limit value is equal to or greater than the lower limit value.
•
8.4 Thermistor Selection
This function is to select wired remote controller thermistor or indoor unit thermistor as the room
temperature.
Step1.
Select "Thermistor Selection" on the Service &
Installation screen and press "OK".
56
" and press "OK".
OK
" to return to Step2.
Service & Installation
Password Setting
Set Contact Information
Temperature Range Restriction
Thermistor Selection
ECO Auto-Off
OK
Select
Temperature Range Restriction
Upper/Lower Limit for Cooling Operation
Upper/Lower Limit for Heating Operation
Upper/Lower Limit for Auto mode
Select
OK
Upper/Lower Limit for Cooling
32°C
16°C
Upper Limit Lower Limit
Set the upper limit larger than the lower limit.
Service & Installation
Password Setting
Set Contact Information
Temperature Range Restriction
Thermistor Selection
ECO Auto-Off
OK
Select
A16382H32B
(Mon) 16:30
Back
Back
OK
Back
(Mon) 16:30
Back
Publicité
