Publicité
9. Service Settings
The service setting items displayed in list depend on indoor unit model.
•
When no operation for 2 hours on Service settings or sub settings screen, it returns to home screen.
•
When the air conditioner is turned on, service setting is disabled.
•
When entering each setting screen, "Please wait for a moment" screen would appear for several
•
seconds.
For more information of service settings, please refer to service manual of the wired remote
•
controller.
9.1 1A: Installation
Step1.
Select "Service Settings" on "Service & Installation"
screen and press "OK".
Step2.
Select "1A: Installation" and press "OK".
NOTE:
Once the setting in 1A is changed, it may take some time to reconnect with the indoor unit.
•
9.1.1 A0: Hotel Key Card Input contact
Step1.
Select "A0: Hotel Key Card Input contact" on "1A:
Installation" screen and press "OK".
Step2.
Press " " or " " to select the desired item and
press "OK".
Press "
A16382H32B
" to return to Step1 after reconnection.
9. Service Settings
Service & Installation
Service Settings
OK
Select
Service Settings
1A: Installation
2C: Cleaning Settings
3d: Cycle Operation
5F: Supporting Service
7J: Diagnosis
Select
OK
1A: Installation
A0: Hotel Key Card Input contact
A1: Operation Mode Lock
A2: Auto Restart after Power failure
A5: Static Pressure Selection
A6: Capacity Limitation
Select
OK
A0: Hotel Key Card Input contact
01: Disable
02: Contact Type-A
03: Contact Type-B
OK
Select
(Mon) 16:30
Back
(Mon) 16:30
Back
(Mon) 16:30
Back
Back
59
Publicité
