6. Function Menu Screen Display
6. Function Menu Screen Display
Various function settings are shown in this chapter.
For how to enter the Menu screen, please refer to "5. Menu Operation".
NOTES:
Some functions cannot be set depending on the type, configuration, and usage status of the indoor
•
unit.
If a function with "
•
1. Display the function menu
Step1.
Select the "Function Menu" and press "OK".
→ The "Function Menu" screen is displayed.
Step2.
Press " " or " " to select the item to set and press
"OK".
Press "
If the "Function Menu" screen remains
•
unchanged for approximately 10 minutes, the
screen returns to the home screen.
Various settings are retained even when the
•
power is turned off.
6.1 Simple Timer
This function is used to start or stop the unit operation at the set time within one day.
The timer operation contents can be set from "Not Used", "Once", or "Everyday".
NOTES:
If "Once" on the timer operation setting is selected, the setting reverts automatically to "Not
•
Used" after the "Once" timer program has been executed.
Do not set the same time for both ON/OFF timers.
•
Scheduled operation (stop) is not possible while the remote control is prohibited.
•
When "
" is displayed, scheduled operation (stop) is not available.
•
Refer to "7.1 Adjusting Date/Time" to set the date and time.
•
The timer is controlled by this wired remote controller.
•
The timer lamp of indoor unit does not turn on.
•
During "Simple timer" operation, if "Leave Home" or "GoodSleep Timer" operation is started, the
•
setting will be automatically changed to "Not Used".
"Simple Timer" cannot be set in "Leave Home" or "GoodSleep Timer" operation.
•
18
" is displayed, it means that the function setting is disabled to be changed.
" to return to the "Menu" screen.
Menu
Function Menu
Screen Display Setting
Service & Installation
Contact Information
Cool
Fan Speed
Louver My Mode
Function Menu
Simple Timer
GoodSleep Timer
Weekly Timer
Leave Home
Functions for ECO mode
Select
OK
A16382H32B
(Mon) 16:30
Menu
(Mon) 16:30
Back