Publicité
6.11 Clean Operation
The dust and dirt adhering to indoor heat exchanger which is the cause of the smell. This function is
to wash away dust and dirt by freezing and thawing of the heat exchanger.
NOTES:
Based on the temperature condition and etc., clean operation might not start. In case of that, the
•
running display will not appear.
When clean operation finishes, the unit will stop automatically.
•
If Weekly Timer or Simple Timer is set, clean operation might stop at the middle point because of
•
the timer setting.
For multi connection :
•
○
When starts "Mold guard" operation, operation is limited to "Fan" operation.
○
When one room operates "Mold guard" operation first, other rooms can operate "Cool", "Dry" or
"Fan" mode. However, when other rooms need to operate "Heat" operation, air conditioner in
other rooms will be in STANDBY mode. After "Mold guard" operation finishes, "Heat" operation
will start.
Some indoor units may need some extra time till showing the running display.
•
Manual FrostWash can not be set during the unit operation is on.
•
1. Set Manual FrostWash.
Step1.
Select "Clean Operation" on the "Function Menu"
screen and press "OK".
Step2.
Select "Manual FrostWash" and press "OK".
Step3.
Select "Yes" and press "OK" to start FrostWash for
indoor unit.
Clean operation is in startup.
A16382H32B
6. Function Menu Screen Display
Clean Operation
My Mode
Wi-Fi Initialization
Power Consumption Display
Reset Filter Reminder Time
Select
OK
Clean Operation
Manual FrostWash
Auto FrostWash
Mold Guard
OK
Select
Clean Operation
Manual FrostWash
Auto FrostWash
Start FrostWash for indoor unit?
Mold Guard
Yes
OK
Select
Clean Operation
Manual FrostWash
Waiting for Clean Function
Auto FrostWash
Mold Guard
OK
Select
Function Menu
(Mon) 16:30
Back
Back
Cancel
Back
startup.
Back
37
Publicité
