Publicité
9.1.8 A9: Gas Leak Sensor detection time
Step1.
Select "A9: Gas Leak Sensor detection time" on
"1A: Installation" screen and press "OK".
Step2.
Press " " or " " to select the desired item and
press "OK".
Press "
9.1.9 AA: Gas Leak Sensor Reset
Step1.
Select "AA: Gas Leak Sensor Reset" on "1A:
Installation" screen and press "OK".
Step2.
Select "Yes" and press "OK" to reset gas leak
sensor.
Press "
NOTE:
This setting is only available when the indoor unit reports Alarm Code 041(Gas Leak Error), in
•
other case, it is unavailable to set and displays with an icon "
A16382H32B
" to return to Step1 after reconnection.
" to return to Step1 after reconnection.
9. Service Settings
1A: Installation
A7: Drain Pump Test
A8: Connection of Gas Leak Sensor
A9: Gas Leak Sensor detection time
AA: Gas Leak Sensor Reset
Reset 1A: Installation
OK
Select
A9: Gas Leak Sensor detection time
01: 20 sec
02: 40 sec
Select
OK
1A: Installation
A7: Drain Pump Test
A8: Connection of Gas Leak Sensor
A9: Gas Leak Sensor detection time
AA: Gas Leak Sensor Reset
Reset 1A: Installation
Select
OK
1A: Installation
A7: Drain Pump Test
A8: Connection of Leak Sensor
Gas Leak Sensor Reset?
A9: Leak Sensor detection time
Yes
Cancel
AA: Leak Sensor Reset
Reset 1A: Installation
Select
OK
".
(Mon) 16:30
Back
Back
(Mon) 16:30
Back
(Mon) 16:30
Back
63
Publicité
