Publicité
Step3.
Press " " or " " to select the setting item, then
press " " or " " to change the setting of each
item.
After all changes are completed, press " " to
select "
6.13 Wi-Fi Initialization
This function is used to reset Wi-Fi module settings when used with the "airCloud Go" application.
Please note that executing this function will clear the configuration, and the Wi-Fi module will be
restored to its factory settings.
Step1.
Select "Wi-Fi Initialization" on the "Function
Menu" screen and press "OK".
Step2.
Select "Yes" and press "OK" to reset Wi-Fi
gateway.
When the Wi-Fi settings are reset, the blue LED
on the indoor unit front panel will flash 4 times
(1 flash per second) for 10/20 seconds. Then the
blue LED will flash 3 times (1 time per second),
meaning the embedded gateway is reset and
ready to be paired to a new Wi-Fi network.
This function is only available for indoor unit with
embedded Wi-Fi adapter.
A16382H32B
" and press "OK" and return to Step2.
OK
6. Function Menu Screen Display
25
.0
Temp
Cool
Select OK to confirm
OK
Clean Operation
My Mode
Wi-Fi Initialization
Power Consumption Display
Reset Filter Reminder Time
Select
OK
Clean Operation
My Mode
Reset Wi-Fi Gateway?
Wi-Fi Initialization
Yes
Power Consumption Display
Reset Filter Reminder Time
OK
Select
My Mode 1
OK
Auto
Louver
Back
Function Menu
(Mon) 16:30
Back
Function Menu
(Mon) 16:30
Cancel
Back
41
Publicité
