Télécharger Imprimer la page

CYBEX PALLAS-FIX Mode D'emploi page 13

Masquer les pouces Voir aussi pour PALLAS-FIX:

Publicité

23
All manuals and user guides at all-guides.com
PFLEGE
Um die größtmögliche Schutzwirkung Ihres Kindersitzes zu gewährleisten, ist es
unbedingt notwendig, dass Sie Folgendes beachten:
– Alle wichtigen Teile des Kindersitzes sollten regelmäßig auf Beschädigungen kont-
rolliert werden. Die mechanischen Bauteile müssen einwandfrei funktionieren.
– Es ist unbedingt notwendig darauf zu achten, dass der Kindersitz nicht zwischen
harten Teilen wie Fahrzeugtür, Sitzschiene usw. eingeklemmt wird und dadurch
beschädigt werden könnte.
– Der Kindersitz muss z.B. nach einem Sturz unbedingt vom Hersteller überprüft
werden.
ENTFERNEN DES BEZUGES
Der Bezug besteht aus vier Teilen, die entweder mit Klettband, Druckknöpfen oder
Knopflöchern am Kindersitz befestigt sind. Sobald Sie alle Befestigungen lösen,
können die Einzelteile abgenommen werden.
Um den Bezug wieder zu befestigen, verfahren Sie in umgekehrter Reihenfolge.
Warnung! Der Kindersitz darf keinesfalls ohne Bezug verwendet werden.
ENTFERNEN DES SITZBEZUGS VON DER SITZLEHNE
1. Ziehen Sie durch Betätigen des Verstellgriffs (h) die Kopfstütze (e) so weit wie mög-
lich heraus.
2. Betätigen Sie den Verstellgriff (h) und ziehen Sie gleichzeitig an der unteren Kante
der obersten Rippe der Sitzlehne (a), um die Kopfstütze (e) zu lösen. Ziehen Sie
diese komplett heraus.
3. Jetzt können Sie den Sitzbezug nach oben hin entfernen.
4. Um die Rückenlehne wieder zusammenzubauen, stecken Sie mit betätigtem Ver-
stellgriff (h) die Kopfstütze (e) in die Rückenstütze (a).
REINIGUNG
Es ist darauf zu achten, dass nur ein Original CYBEX Sitzbezüge verwendet wird, da
auch der Bezug ein wesentlicher Bestandteil der Funktion ist. Ersatzbezüge erhalten
Sie im Fachhandel.
Hinweis! Bitte den Bezug vor der ersten Verwendung waschen. Der Bezug darf bei
30°C im Schonwaschgang gewaschen werden. Sollten Sie mit mehr als 30°C wa-
schen, kann es zu Ausfärbungen des Bezugstoffes kommen. Bitte den Bezug geson-
dert von anderer Wäsche waschen und keinesfalls maschinell trocknen! Den Bezug
keinesfalls in der prallen Sonne trocknen! Die Kunststoffteile können mit einem milden
Reinigungsmittel und warmen Wasser gereinigt werden.
Warnung! Bitte auf keinen Fall chemische Reinigungs- oder Bleichmittel verwenden!
PRODUCT CARE
In order to guarantee the best possible protection of your child seat, it is necessary
that you take note of the following:
– All important parts of the child seat should be examined for any damages on a
regular basis. The mechanical parts must function flawlessly.
– It is essential that the child seat does not get jammed between hard objects e.g.
like the door of the car, seat rail etc. causing possible damage to the seat.
– The child seat must be examined by the manufacturer after a fall or similar
situations.
REMOVING THE SEAT COVER
The seat cover consists of four parts which are fixed to the seat either by velcros, press
buttons or button holes. Once you have released all fixations, the cover parts can
be removed.
In order to put the covers back on the seat, proceed in the reversed order as
removing them.
Warning! The child seat must never be used without the cover.
REMOVING THE SEAT COVER FROM THE BACKREST
1. Pull the headrest (e) into its top position by using the release handle (h).
2. To release the headrest (e), simultaneously pull the handle (h) and the lower rim
of the upper rib of the backrest (a). Now the headrest (e) can be completely
detached.
3. Now the cover can be removed.
4. To reassemble, pull the adjustment handle (h) and insert the headrest (e) into the
backrest (a).
CLEANING
It is important to use only original CYBEX seat cover since the cover is also an essential
part of the function. You may obtain spare covers at your retailer.
Note! Please wash the cover before using it the first time. Seat covers are machine
washable at max. 30°C on delicate cycle. If you wash it at a higher temperature,
the cover fabric may lose colour. Please wash the cover separately and never dry it
mechanically! Do not dry the cover in direct sunlight! You can clean the plastic parts
with a mild detergent and warm water.
Warning! Please do not use chemical detergents or bleaching agents under any
circumstances!
ENTRETIEN
Afin de garantir la meilleure protection possible à votre enfant, il est nécessaire de
prendre connaissance des indications suivantes :
– Toutes les pièces du siège-auto doivent être examinées régulièrement. Les
éléments mécaniques doivent être en parfait état.
– Il est essentiel de ne pas coincer le siège contre des éléments rigides tels que
portière du véhicule, rails de siège etc. susceptibles d'endommager le siège-auto.
– Le siège-auto doit être examiné par le fabricant après une chute ou tout incident
similaire.
RETIRER LA HOUSSE
La housse est constituée de cinq éléments fixés par Velcro, boutons-pressions ou
boutons classiques. La housse peut être retirée une fois que chaque élément a été
détaché. Pour remettre la housse en place, inversez l'ordre des étapes.
Attention ! Le siège-auto ne doit jamais être utilisé sans sa housse.
RETIRER LA HOUSSE DU DOSSIER
1. Remontez l'appuie-tête (e) au maximum en actionnant la poignée (h).
2. Pour détacher l'appuie-tête (e), actionnez la poignée (h) tout en exerçant une
pression sur le haut de la protection latérale (a). L'appuie-tête peut ensuite être
complètement détaché.
3. La housse peut à présent être retirée.
4. Pour remettre en place l'appuie-tête, actionnez la poignée (h) et insérez l'appuie-
tête dans le dossier (a).
NETTOYAGE
Il est important de toujours utiliser la housse originale du siège CYBEX, car elle fait
partie intégrante de ses fonctionnalités. Les pièces détachées peuvent être
obtenues par le biais de votre revendeur CYBEX.
Note! Veuille laver la housse avant de l'utiliser pour la première fois. Les housses sont
lavables en machine à30°C maximum, cycle délicat. Si vous lavez à température
plus élevée, le tissu peut passer. Veuillez laver la housse séparément et ne jamais
sécher mécaniquement! Ne pas sécher au soleil directement! Les parties plastiques
peuvent être nettoyées au savon doux et à l'eau tiède.
Attention ! N'utilisez sous aucun prétexte de détergent chimique ou chloré pour le
nettoyage du siège.
24

Publicité

loading