Rational iCombi Pro Manuel D'installation page 6

US-English
CAUTION
Sharp edges on the panels
Risk of cuts on the panels when
working on the unit.
Wear protective gloves.
NOTE
Damage to the connections can occur
during movement
Disconnect all connections before
moving the Combi-Duo. Ensure all
connections are in accordance with the
specifications again once the work is
complete.
Align the stand or the leveling kit
horizontally before setting up the
Combi-Duo setup again.
Castors: Apply the parking brake.
3 Product description
Combi-Duo versions: Electric unit as the
bottom unit
The following Combi-Duo versions are
available:
Bottom unit: Top unit
Gas unit
6 half size XS or 6 half
Gas right size electric/
hinged gas
6 full size Gas XS or 6 half
right hinged size / 6 full
size electric/
gas
6 half size XS or 6 half
Gas left size electric/
hinged gas
6 / 28
Bottom unit:
Gas unit
6 full size Gas
left hinged
Information on other Combi-Duo versions,
such as with gas units as the bottom unit,
is available in the relevant installation man-
uals.
Scope of delivery [
1
3
5
7
9
Dimensions
Note that the connection heights and in-
sert heights for both units change with the
Combi-Duo setup. Drawings for the setup
and precise dimensions and height of the
topmost insert rail for the different com-
positions can be found in separate dimen-
sional drawings.
NOTE! If the insert height is over 1600
mm [63 inch], attach a safety label on the
unit.
Legend for the dimensional drawings:
1
Item number
3
60.75.751
5
60.75.752
60.75.753
80.51.377_iCombiPro-iCombiClassic_CD-G_IM_US-nord
3 | Product description
Top unit
6 full size Gas
left hinged
Figure
Flue gas stack 2
Feet front 4
Base plate top 6
Shaft cover 8
Ethernet cable
Top rack height 2
Rack loading 4
height - bottom
unit
Water drain
height - bottom
unit
Item number
60.75.754
01]
Feet rear
Base plate bot-
tom
Heat guard cover
Exhaust pipes
Rack loading
height - top unit
Water drain
height - top unit