Rational iCombi Pro Manuel D'installation page 5

2 | Safety
WARNING
Risk of crushing or injury when tilting
or turning the Combi-Duo setup
The setup could fall off the installation
surface when tilting or turning the
Combi-Duo setup.
Do not tilt the setup on the
n
installation surface.
When moving the setup, ensure that
n
the weight of the units is evenly
distributed and the feet or guide
rollers of the stand or leveling kit are
on the installation surface.
Anchor or Fix the setup with
n
accessories specified by the
manufacturer.
WARNING
Risk of burns due to hot exhaust pipes.
The exhaust pipes and exhaust gas
pipes can get extremely hot during
operation of the Combi-Duo setup.
Do not touch the exhaust pipes
n
during operation.
For gas units: Do not touch the
n
exhaust gas pipes during operation.
80.51.377_iCombiPro-iCombiClassic_CD-G_IM_US-nord
CAUTION
Risk of crushing due to the weight of
the units
Fingers, hands and feet may be trapped
under the units.
Wear suitable protective clothing for
n
transport and setup.
Only setup the unit in sequence.
n
Only lift the units individually onto
n
the installation surface.
Use carrying aids such as the
n
manufacturer's lifting aids.
Note the center of gravity of the
n
relevant units when lifting.
Only lift the units via the designated
n
lifting points.
CAUTION
Risk of crushing and injury during
Combi-Duo installation
There is an increased risk of crushing
hands and fingers in Combi-Duo
installations.
The distance between the bars of the
lifting aid and the Combi-Duo kit is
very small when positioning on the kit.
Make sure that the unit is placed
n
carefully on the kit and is stable on
the installation surface.
Place the unit on the installation
n
surface so that there is sufficient
space between the kit and the lifting
aid to protect hands and fingers.
US-English
5 / 28