Rational iCombi Pro Manuel D'installation page 9

6 | Remote control
>
Enter the IP address of the iCombi
to be controlled remotely.
>>
The units are connected.
Important: You can switch between the
units (Pos. 6) [ Figure
When accessing the unit to be controlled
from the controlling unit, the display is
framed in the selected color (see Step 5).
This shows that settings are now being
made on a different unit.
NOTE
Network connection for Combi-Duo
configuration with active remote
control
For units with active remote control,
the LAN ports are occupied and the
WiFi connection is deactivated. To
connect the units to a network, an
external switch must be set up.
Please note that the switch enables the
remotely controlled units to
communicate with each other and with
the network, e.g. for
ConnectedCooking.
Read through the ConnectedCooking doc-
umentation on networking for detailed in-
formation on configuration with active re-
mote control:
80.51.377_iCombiPro-iCombiClassic_CD-G_IM_US-nord
20].
US-English
9 / 28