Beurer BM 28 Mode D'emploi page 25

NOTICE
• Do not use rechargeable batteries.
Notes on electromagnetic compatibility
 CAUTION
• The device is suitable for use in all environments listed in
these instructions for use, including domestic environments.
• The device may not be fully usable in the presence of elec-
tromagnetic disturbances. This could result in issues such as
error messages or the failure of the display/device.
• Avoid using this device directly next to other devices or
stacked on top of other devices, as this could lead to faulty
operation. If, however, it is necessary to use the device in the
manner stated, this device as well as the other devices must
be monitored to ensure they are working properly.
• The use of accessories and/or replacement parts other than
those specified or provided by the manufacturer of this device
could lead to an increase in electromagnetic emissions or a
decrease in the device's electromagnetic immunity; this can
result in faulty operation.
• Keep portable RF communication devices (including periph-
eral equipment, such as antenna cables or external antennas)
at least 30 cm away from all device parts, including all cables
included in delivery.
• Failure to comply with the above can impair the performance
of the device.
5. DEVICE DESCRIPTION
The associated drawings are shown on page 3.
Cu
1
Cu connector
3
Connection for cu con-
5
nector
Connection for mains part
7
9
START/STOP button
SET button
11
Information on the display
Time and date
12
Diastolic pressure
14
Cardiac arrhythmia
16
symbol
Pulse symbol
Memory display:
18
average value ( ),
morning ( ), evening
( ), memory space
number
20
Alarm function
22
User memory
Resting indicator display
24
25
Cu line
2
Display
4
Risk indicator
6
Function buttons -/+
8
M memory button
10
Systolic pressure
13
Calculated pulse rate
15
17
Release air
Battery replacement
19
symbol
Risk indicator
21
Cu position control
23