Publicité
USE
LIGHT COLOR SELECTION, LIGHT BRIGHTNESS
SELECTION AND ENTERTAINMENT MODE
The switching on/off of the LED lights depends on the door
opening/closing. When the door is opened, the lights switch
on automatically. When the door is closed, the lights switch
off to save energy.
For selecting the light color, press button [12] to change the
color of the LED illumination between amber, blue or white.
Press the [12] button for 3 seconds to activate the
entertainment mode and keep the light constantly on even
when the door is closed. The displays of the three
temperature zones will show 'ON' for 5 seconds. After
5 seconds, the digital displays will show again the set
temperatures in the 3 zones.
To adjust the brightness of the lights, press [12] until all
digital displays of the three temperature zones show "ON".
Within 5 seconds, press [4] , [5] , [7] , [8] , [10] , [11] to
adjust the brightness of the LED lights among seven levels,
in brightness increments from L1 to L7.
52
CELSIUS AND FAHRENHEIT SELECTION
To switch between Celsius and Fahrenheit, press button
[13]. Each press makes a switch. Celsius is set as the
factory default.
SHOWROOM MODE
Press [1] + [2] buttons simultaneously for 3 seconds to
enable the function.
This mode is used when the refrigerator is on display in a
retail store or if you want to turn the cooling off and
deactivate all other functions except interior lighting. When
enabled, the digital displays of the 3 temperature zones will
all show "Sn". If no button is pressed for 72 hours, the
mode will deactivate automatically. Press [1] + [2]
simultaneously to deactivate the showroom mode at any
time.
NOTE
Do not store any item while in showroom
mode, because the appliance then remains
at room temperature.
Publicité
