Publicité
INSTALLATION INSTRUCTIONS
MINIMUM HEIGHT ADJUSTMENT FOR LEVELING
A. 8 mm (5/16")
ASSEMBLY DIMENSION BETWEEN WOOD PANEL AND
FRIDGE DOOR
A. 19 mm (3/4")
B. 82 mm (3 3/8")
A
Fig. 7
A
B
Fig. 8
ELECTRICAL REQUIREMENTS
The appliance must be installed to all electrical connections
in accordance with state and local codes.
CAUTION
Do not use extension cords or two-prong
adapters and do not remove the ground
terminal of the grounding cable.
CAUTION
A qualified electrician must ensure that the
poles of the socket are connected correctly.
Verify that the grounding of the socket is
correct.
WARNING
Do not connect the appliance to electronic
energy saver plugs.
The socket must comply with the following data:
ELECTRICAL REQUIREMENTS
Plug type
Outlet
Voltage
Frequency
Fuse
The appliance must be plugged into its own individual
electrical outlet with a voltage rating that matches the rating
label on the appliance. This provides the best performance
and also prevent overloading wiring circuits that could
cause a fire hazard from overheating.
After installation, wait at least 2 hours before connecting
the appliance to the electrical power to avoid damaging the
compressor.
IMPORTANT
Do not use extension cords and/or multiple
adapters for the power supply connection.
If the electrical wiring or the electric power supply of the
house requires alteration, the necessary procedures must
be performed by a qualified electrician.
Please heed the following rules:
•
The electrical outlet or panel must be easily accessible
in case of an emergency; it must not be hidden behind
the product.
SCHUKO
2-prong
220 V – 240 V
50 Hz
15 A
19
Publicité
