Publicité
Connecting the refrigerator
1. Connect the refrigerator securely by hand to the gas supply (fig. k, page 12).
!
WARNING! Explosion hazard
It is very important that you keep the following tightening torques.
A
NOTICE!
Always use a backup wrench (size 17 mm) when connecting the gas
supply line to the refrigerator's gas inlet fitting.
Item in
fig. k, page 12
1
2
3
4
2. Have a leak test and a flame test performed by an authorized specialist after pro-
fessional installation.
Ensure you are issued with a certificate of inspection and hand this certificate to
the end user for safekeeping.
6.2
Connecting to DC and AC
!
WARNING! Failure to obey these warnings could result in death
or serious injury. Electrocution hazard
The electrical installation and repairs may only be performed by a
specialist in accordance with the applicable national regulations and
standards.
28
Description
Screw M4 (Torx TX20)
Tightening torque: 2 Nm
Refrigerator gas connection
M14 x 1.5 (d = 8 mm/ISO 8434 (DIN 2353))
Gas pipe with ring coupling (size 17)
Tightening torque: 25 Nm
Backup wrench (17 mm)
RM10.5, RMS10.5
EN
Publicité
