Publicité
RM10.5, RMS10.5
Find the instructions manual for changing the door stop and the
decorative plate online at
http://qr.dometic.com/berFOL
5.1
Preparing the installation
A
NOTICE!
• The refrigerator may not be installed in the rear of mobile homes with
the door pointing in the direction of travel.
• Use exclusively original Dometic ventilation grilles to ensure safe
operation.
When installing the refrigerator, note the following:
• Ensure that the floor is solid and level.
Park the vehicle horizontally for this purpose.
• Ensure that the refrigerator is level.
• The refrigerator must be installed in a way that the following requirements are
met:
– The refrigerator is easily accessible for service work .
– The refrigerator must be easy to de-install and install.
– The refrigerator can be easily removed from the vehicle
• Ensure that no heat-sensitive components are placed in the area of the gas
burner, such as cables, cable ducts, etc.
• The refrigerator must be installed in a recess so that it stands secure when the
vehicle is in motion. Note the following dimensions (fig. 1, page 3 and fig. 2,
page 4):
Refrigerator
Height (A)
Width (B)
Depth (C)
(excludes control knob 5 mm)
EN
RM10.5
RMS10.5
(S)(G)(T)(P)
(S)(G)(T)(P)
Overall dimension in mm
821
523
548
Installing the refrigerator
RMS10.5X
(S)(G)(T)(P)
821
821
523
523
548
603
21
Publicité
