Publicité
RM10.5, RMS10.5
If you have to use a roof vent instead of the air outlet vent:
➤ Cut out a section in the roof. Refer to the roof vent instruction manual for the
required dimensions.
When doing so, observe the information in chapter "Preparing the installation"
on page 21.
5.4
Installing the ventilation grille
I
NOTE
Use exclusively original Dometic ventilation grilles to ensure safe
operation.
No. in
fig. a, page 10
1
2
3
4
5
1. Seal the installation frame to make the connection waterproof (fig. b, page 10).
2. Insert the installation frame and screw it down tightly (fig. c, page 10).
Use all the fixing holes for this.
3. Install the hose adapter as shown (fig. d 1, page 11).
4. Insert the ventilation grille as shown (fig. e, page 11).
5.5
Installing condensation drain
I
NOTE
• Condensation can form inside the refrigerator due to frequent door
opening, incorrectly stored food or food that is stored when it is too
warm.
• Condensation must be drained with a constant slope.
Install the condensation drain as follows:
➤ Attach the condensation hose directly to the adapter on the ventilation grille
(fig. d 2, page 11).
EN
Description
Installation frame
Ventilation grille
Slider
Winter cover for the ventilation grille (accessories)
Adapter for the condensation drain hose
Installing the refrigerator
25
Publicité
