Publicité
MAINTENANCE PROGRAMMING
• The display will read:
MAINTENANCE
• By pressing ENTER, the display will read:
DELIVE. 10000
01 JANUARY 2005
• Use the ▲ ▼ keys to set both values.
• Use the ENTER tkey to confirm.
Once the set delivery limit or the set mainte-
nance date have been reached, the display
will visualize the message:
MAINTENANCE
To remove the MAINTENANCE message,
move the date forward or increase the num-
ber of coffees.
Once the changes has been made, to make
them effective it's necessary to reset the
internal cycles counter. Press and hold the
RESET button for 10 seconds to reset the
internal counter
ALARM WASH:
Allows you to set the timer (hours and minutes)
of the alarm washing groups.
You can access functions by pressing theo
ENTER key.
Using the buttons ▲ ▼ you can select between
options ACTIVE and INACTIVE.
Selecting NOT ACTIVE status with ENTER to
return to the main menu. Instead, by selecting
the ACTIVE state must be set with the buttons
▲ ▼ and ENTER, the hours and minutes after
which the alarm will be displayed. After setting
58
the minute you return to the main menu.
Pressing the RESET button to return to the
main menu and any changes made are not
saved.
SELECTING THE DESIRED LANGUAGE
• The display will read::
LANGUAGE
• Press the ENTER key to visualise the lan-
guage already set. Choose the desired lan-
guage by using the ▲ ▼.
• Press ENTER to confirm and pass to the
next step.
• Press RESET to return to the previous page
without confirming.
TEMPERATURE
UNITY
SELECTION
The display will read
TEMPERATURE
• By pressing ENTER, the display will read:
TEMPERATURE
FAHRENHEIT
o
TEMPERATURE
CELSIUS
• Press ▲ ▼ to modify the measures unit
setted.
• Press ENTER to confirm and pass to the
next step.
• Press RESET to return to the previous page
without confirming.
KEYBOARD LIGHTING ADJUSTMENT
• The display will read:
LIGHT ADJUSTMENT
• By pressing ENTER, key, the display will
read:
KEYS
DISPLAY
• With the KEYS light X blinking, select the
value of desired brightness choosing from a
minimum value of 1 to a maximum of 6 by
using the ▲ ▼ keys.
• Confirm by pressing ENTER.
MEASURE
• The temperature display value Y blinks and
with ▲ ▼ keys it is possible to set the displ
ay lighting Y from a minimum value of 1 to a
maximum of 3.
• Press ENTER to confirm and pass to the
next step.
• Press RESET to return to the previous page
without confirming.
ENTER THE HIDDEN FUNCTIONS
This allows to enter other special functions
In BRIGHTNESS ADJUST. mode, hold down
the 1 long coffee
& SECOND group for at least 3 sec to open the
special menu.
Now the buttons are for:
RESET (to exit hidden menu).
▲ ▼ UP/DOWN (to change the parameters).
ENTER (to surf the hidden menu).
X
Y
+
keys of the FIRST
Publicité
