Publicité
5.
PROGRAMMING
5.1
KEY
2
3
LCD Display.
①
RESET Key:
to turn the machine on and
②
off and to exit menu
CURSOR Key: to scroll the menu and to
③
increase and decrease
④
values.
ENTER:
To access the menu.
⑤
5.2
DISPLAY
(USER mode)
LIST OF DISPLAY FUNCTIONS (USER
MODE):
AUTO CLEAN CYCLE
DOSES
POURING COUNT
TOTAL
MACHINE TOTAL
TOTAL WASHES
To enter the user mode display environment,
hold down the ENTER key for 8 seconds and
wait to hear the first acoustic signal.
The machine will read:
AUTO.CLEAN.CYCLE
AUTOMATIC CLEANING CYCLE:
• The display will show:
AUTO.CLEAN.CYCLE
• Press ENTER and the display will read:
1
AUTO.CLEAN.CYCLE
4
5
• The central key in each unit
Fig. 19
flash on and off. Insert the blind filter (Fig. 2)
into the filter-holder, add half a dose of
PULICAFF and attach the filter-holder into
the unit where you intend to carry out the
automatic cleaning cycle. Carrying out a
cleaning cycle in more than one unit at a
time is possible.
• Press the
cleaning cycle. The display will read:
AUTO.CLEAN.CYCLE
Where 1L indicates that the cleaning cycle
has been activated within the 1st unit. Once
the cycle of 15 deliveries of 5 seconds each,
with a 10-sec-ond pause between each
delivery, has been completed the selected
unit
key will begin to flash on and off
again and the display will read:
• Press the RESET key to view the next func-
tions or to quit the display mode.
SELECT
will begin to
key to start the unit automatic
¡ L
RINSE
DOSES:
• The display will read:
DOSES
• Press the ENTER key and all of the dose,
hot water and steam keys will start to flash.
• Pressing one of the flashing keys will show
the corresponding programmed setting on
the display.
• Press the ▲ key to return to the previous
function.
• Press the RESET key to quit the display
mode.
POURING COUNT
• The display will read:
DELIVERY COUNT
• Press the ENTER key and all of the dose,
hot water and steam keys will start to flash.
• Pressing one of the flashing keys will show
the corresponding counter on the display.
• Press the ▲ key to return to the previous
function.
• Press the RESET key to quit the display
mode.
49
Publicité
