Publicité
• In the standard version (without temperature
probe), on pressing the
read:
PROGRAM. DOSES
STEA.SEC.
followed by the amount already set by the
manufacturers. Press con the ▲ ▼ keys to
vary the steam delivery time.
• If a new sampling is desired press the
button again.
Delivery starts. When the desired dose has
been reached press the button again
• The display will show the new value set which
can still be changed by pressing the ▲ ▼.
• Press the ENTER key or go on to a further
selection to terminate the operation.
• Press the RESET key to cancel program-
ming.
The
button will turn off.
TRANSFERRING DOSES:
• When the display reads:
PROGRAM. DOSES
SELECT
• transferring the set dose to other units is
possible by pressing the▼ key.
52
• The display will read:
the display will
At this point, the continuous coffee keys
of the second, third and fourth groups will
flash as shown in Fig. 20.
• Selecting the continuous key
will stop flashing and remain lit) will transfer
.
the values programmed for the first group to
the other groups, one at a time:
.
• Press the ENTER key to confirm.
At this point the display will read:
• Press the RESET or ▲ key to exit without
confirmation.
DOSES TRANSFER
SELECT GROUPS
(the key
Fig. 20
PROGRAM DOSES
SELECT
STANDARD DOSES:
• When the display reads:
DOSES TRANSFER
SELECT GROUPS
we mean to recall the standard dose values.
• Press the ▼key.
The display will read:
DEFAULT SETTING
SELECT GROUPS
At this point, the continuous coffee keys
will begin to flash.
• Select one or more continue keys (the key or
keys selected will remain lit up). The key or
keys will recall the selected unit's standard
doses.
• Press the ENTER key to confirm.
The display will read:
PROGRAM DOSES
SELECT
• Press the RESET to ▲key to exit without
confirmation.
NOTE: all the selections can be programmed
for a maxi-mum of two minutes; after
that time a flashing message will appear
on the display saying:
ERROR
Publicité
