Publicité
TOTAL:
• The display will read:
TOTAL
• The short coffee key
of each group will
flash and when pressed, the machine will
show the number of coffees poured with the
given group.
• Press the ▲ ▼ keys to view the other func-
tions.
• Press the RESET key to quit the display
mode.
MACHINE TOTAL
• The display will read:
MACHINE TOTAL
DELIVE.
xxx
• Press the ▲ ▼ keys to view the other func-
tions.
• Press the RESET key to quit the display
mode.
WASH COUNT
• The display will read:
CLEANING COUNTER
• The long coffee key for each group
flash and when pressed, the display will
show the number of wash cycles carried out
for that particular group.
• Press the ▲ ▼ keys to view the other func-
tions.
• Press the RESET key to quit the display
mode.
50
5.3
PROGRAMMING
(TECHNICIAN Mode)
LIST OF PROGRAMMABLE FUNCTIONS:
(TECHNICIAN MODE):
AUTO.CLEAN.CYCLE
DOSE PROGRAM.
DELIVERY COUNT
ACTIVE UNITS
*
ON-OFF PROGRAM.
ENERGY SAVING
SETPOINT TEMPERATURE (and OFFSET)
CUP-WARMER PRO.
DATE/TIME
DISPLAY SETTING (and DELIVERING TIME)
DELIVERING IN WASHING MODE
POURING TIME
°
SETPOINT PRESS.
HISTORICAL ALARM
MAINTENANCE
WASH ALARM
LANGUAGE
TEMPERATURE
LIGHT ADJUST
Operation to be carried out EXCLUSIVELY
by a Qualified Technician. Adjustment by
qualified technicians can invalidate the guarantee.
* T3 version only
° Digit version only
will
To enter the Technician Mode programming envi-
ronment, hold down the ENTER key for at least 10
seconds and wait for the acoustic signal:
AUTO.CLEAN.CYCLE
followed by:
PROGRAM. DOSES
*
AUTOMATIC CLEANING CYCLE
*
• The display will read:
AUTO.CLEAN.CYCLE
• Press ENTER and the display will read:
AUTO.CLEAN.CYCLE
SELECT
• The central key in each unit
flash on and off. Insert the blind filter (Fig. 2)
into the filter-holder, add half a dose of
PULICAFF and attach the filter-holder into
the unit where you intend to carry out the
automatic cleaning cycle. It is possible to
wash more than one group at the same time.
key to start the unit automatic
• Press the
cleaning cycle. The display will read:
AUTO.CLEAN.CYCLE
¡ L
Where 1L indicates that the cleaning cycle
has been activated within the 1st unit. Once
the cycle of 15 deliveries of 5 seconds each,
with a 10-second pause between each deliv-
will begin to
Publicité
