Publicité
OFFS. G1: Group 1 Offset
OFFS. C1: Boiler 1 Offset
OFFS. G2: Group 2 Offset
OFFS. C2: Boiler 2 Offset
OFFS. G3: Group 3 Offset
OFFS. C3: Boiler 3 Offset
OFFS. G4: Group 4 Offset
OFFS. C4: Boiler 4 Offset
CUP-WARMER PROGRAMMING:
• The display will read:
CUP-WARMER PROG.
In the cup warmer section of the list of program-
mable hidden functions, it is possible to select one
of the following types of cup warmer; single (tradi-
tional), single temperature, double temperature.
Pressing ENTER will open the sub-menu:
Single Cup Warmer:
• The display will read:
CUP-WARMER PROG.
• Pressing ENTER, will cause the display to
read, for example:
CUP-WARMER PROG.
ON XX OFF xx
The message ON XX will begin to flash; use
the ▲ ▼ keys to change the cup warmer
open time (from 0 to 60 min.).
• Press ENTER to confirm and pass to the cup
warmer OFF time (from 0 to 60 min.).
NOTE: Setting one of the two ON/OFF values to
0 will automatically bypass the function.
When the cup warmer is programmed, the
button will flash slowly.
• Press the ENTER key to pass to the next
page.
Single temperature:
• The display will read:
CUP-WARMER
SETPOINT
XXX°C
• Using the ▲ ▼ keys, it is possible to
increase or reduce the temperature within a
certain range [40°C ÷ 80°C] / [104°F ÷
176°F].
• Press ENTER to confirm and pass to the
next step.
• Press RESET to return to the previous page
without confirming.
Double Temperature
• The display will read:
CUP-WARMER
SETPOINT
XX°C
• Using the ▲ ▼ keys, it is possible to increase
or reduce the temperature no.1 within a certain
range [40°C ÷ 80°C] / [104°F ÷ 176°F].
• Press RESET to return to the previous page
without confirming.
• Press ENTER to confirm and pass to the next
step; the display will read:
CUP-WARMER
SETPOINT
• Using the ▲ ▼ keys, it is possible to
increase or reduce the temperature no.2
within a certain range [40°C ÷ 80°C] /
[104°F ÷ 176°F].
• Press ENTER to confirm and pass to the
next step.
• Press RESET to return to the previous page
without confirming.
DATE/TIME PROGRAMMING:
• The display will read:
• By pressing the ENTER, key, the display will
read for example:
MONDAY
The times will start to flash on and off.
• Vary the hours and the minutes by using the
key ▲ ▼.
™
• Confirm by pressing the ENTER key.
Once the hours and the minutes have been
varied press ENTER again and vary the day,
the month and the year by using the same
procedure as de-scribed above.
On completion press ENTER to go on to the
next page.
¡
XXX°C
DATE/HOUR
08:22
08-MAG.-03
55
Publicité
