Removing The Rear Shock - Sherco 250 SE-R Manuel Du Propriétaire

250-300 SE/R
Chassis maintenance (continued)

REMOVING THE REAR SHOCK

1
3
116
2
4
Place the motorcycle on a suitable stand.
Remove the right side plate.
Remove the escape.
Remove the screws
1
along with the intermediate exhaust pipe.

ATTENTION
Do not remove the muffler after operating the motor-
cycle. It can behot and there is a risk of being burned.
Remove the shaft
3
Remove the screw
4
Remove the top screw of the shock.
Remove the shock from the top.
and and the muffler
2
.
.