Sherco 250 SE-R Manuel Du Propriétaire page 85

Fig 1 SPD function
Fig 2 MAX speed function
Fig 3 AVG function
Fig 4 DST function
Fig 5 DST2 function
SPD function Current speed (screens 1 and 2):
displays the current speed of the vehicle.
The speed can be displayed in km/h (default)
or mph. ( p.85)
☛
MAX speed (screen 3): displays the maximum
speed since the last reset was performed.
The maximum speed can be displayed in
km/h (default) or mph. (
Reset to 0 →MAX Function→ Hold the right
Button down for 3seconds →0→ Reset to 0
done
AVG function Average speed (screen 3): displays
the average speed of the vehicle since the
last reset was performed.
The average speed is displayed in the chosen
units, km/h (default) or mph (
Reset to 0 →AVG Function→ Hold the right
Button down for 3seconds →0→ Reset to 0
done
DST function (screen 1): displays the mileage
traveled by the vehicle since the last reset
was performed.
The distance is displayed in the selected
units, km/h (default) or mph (
Reset to 0 →DST Function→ Hold the right
Button down for 3seconds →0.0→ Reset to 0
done
DST2 function (screen 1): displays the mileage
traveled by the vehicle since the last reset
was performed.
The distance is displayed in the selected
units, km/h (default) or mph (
Reset to 0 →DST2 Function→ Hold the right
Button down for 3seconds →0.0→ Reset to 0
done
p.85)
☛
p.85)
☛
p.85)
☛
p.85)
☛
83