Cooling System; Servicing The Cooling System - Sherco 250 SE-R Manuel Du Propriétaire

250-300 SE/R

Cooling System

SERVICING THE COOLING SYSTEM

1
Motorcycle horizontal
90
ATTENTION
- The hot liquid can cause severe injuries.
- The coolant is harmful
- After contact with skin or eyes, or ingestion,
or injuries caused by hot liquids: Consult a physician
- Use protective gloves.
- Do not replace the coolant with water or other not
approved fluids: it could damage your engine.
- Follow these procedures carefully and always fill
the engine with coolant when the engine is cold.
- Place the bike upright on a horizontal surface.
- Remove the cap
1
Fill the radiator full so that there is no air in the
system.
Approved
Coolant
Replace the screw
2
Radiator
Bleed screw
Fill the coolant to the top of the radiator.
Replace the cap and check to make sure
1
it is tight.
ATTENTION
It is important to follow this procedure.
The lack of fluid, or the presence of a pocket
of air left in the radiator can cause
serious damage to the engine.
.
Minerva Perma Universal
D 4 seasons -25°C
.
M6X8 8Nm